fix(setup): inject CLAUDE_BIN, OCP_ADMIN_KEY, PROXY_ANONYMOUS_KEY into service env

Gap #1 partial (CLAUDE_BIN): setup.mjs now detects `which claude` at install
time (or reads $CLAUDE_BIN) and writes CLAUDE_BIN into the service unit
EnvironmentVariables dict. Works for nvm/homebrew paths not in server.mjs's
hardcoded list, and for older server.mjs deployments.

Gap #2 (OCP_ADMIN_KEY): reads $OCP_ADMIN_KEY from the user's shell env and
conditionally injects it into the plist/systemd unit. Empty/unset → key is
omitted entirely (server.mjs treats empty string as "no admin"). Key value is
never logged; only its length is reported.

Gap #6 partial (PROXY_ANONYMOUS_KEY): reads $PROXY_ANONYMOUS_KEY and
conditionally injects it. Unset → key is omitted (anonymous access disabled).

All three keys are read via process.env at install time; no new CLI flags.
Injection status is logged before the !DRY_RUN guard so dry-run shows what
would be written.

Identified during fresh-state Round 2 testing.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

README.md

@@ -6,8 +6,6 @@
 
 *Open source from day one, used daily by my family, maintained on nights and weekends. If OCP saves you money too, you can [☕ buy me a coffee](https://buymeacoffee.com/dtzp555) — [full story below](#support-ocp).*
 
-*If OCP saves you a setup, a ⭐ helps other folks discover it. Issue reports are even more useful — that's the highest-quality feedback this project gets.*
-
 OCP turns your Claude Pro/Max subscription into a standard OpenAI-compatible API on localhost. Any tool that speaks the OpenAI protocol can use it — no separate API key, no extra billing.
 
 ```
@@ -187,8 +185,7 @@ The setup script will:
 1. Verify Claude CLI is installed and authenticated
 2. Start the proxy on port 3456
 3. Install auto-start (launchd on macOS, systemd on Linux)
-
+4. Symlink `ocp` to `/usr/local/bin` for CLI access
-After install the `ocp` CLI lives at `~/ocp/ocp`. To put it on your PATH, either symlink it manually (`ln -sf ~/ocp/ocp ~/.local/bin/ocp` if `~/.local/bin` is on your PATH, or `sudo ln -sf ~/ocp/ocp /usr/local/bin/ocp` for a system-wide symlink) or add an alias (`alias ocp=~/ocp/ocp`). Otherwise invoke it as `~/ocp/ocp <subcommand>`. The rest of this README assumes `ocp` is on your PATH.
 
 **Single-machine use** — just set your IDE to use the proxy:
 ```bash
@@ -398,15 +395,11 @@ In `multi` mode, the admin can designate a single well-known "anonymous" key tha
 
 **Enable**:
 
-The anonymous key is wired into the service unit (launchd plist on macOS, systemd unit on Linux) at install time. Export `PROXY_ANONYMOUS_KEY` in your shell before running `setup.mjs`, and `setup.mjs` will write it into the service unit env so the auto-started proxy picks it up:
-
 ```bash
 export PROXY_ANONYMOUS_KEY=ocp_public_anon   # or any string of your choice
-node setup.mjs --bind 0.0.0.0 --auth-mode multi
+ocp start                                    # or however you start the server
 ```
 
-If OCP is already installed without it, re-export the env var and re-run `node setup.mjs` (the installer is idempotent — it refreshes the service unit). Then `ocp restart` so the running proxy picks up the new env. Setting `PROXY_ANONYMOUS_KEY` only in your interactive shell **does not** affect the auto-started proxy — the service unit is the source of truth for its environment.
-
 **Client side**: the anonymous key value is exposed via `GET /health` as the field `anonymousKey` (null when not set). Clients like `ocp-connect` can auto-discover and use it, so the end user doesn't need to get a personal key from the admin.
 
 **Security note**: setting this env var is an **opt-in** to public access — anyone who can reach your OCP endpoint can use it, up to any rate limits you configure. Don't enable this on internet-exposed OCP instances without additional protection.

setup.mjs

@@ -39,6 +39,29 @@ const PROVIDER_NAME = opt("provider-name", "claude-local");
 const BIND_ADDRESS = opt("bind", "127.0.0.1");
 const AUTH_MODE_CONFIG = opt("auth-mode", "none");
 
+// ── Service-env injection: CLAUDE_BIN, OCP_ADMIN_KEY, PROXY_ANONYMOUS_KEY ──
+// These are read from the user's shell env at install time and written into
+// the service unit (plist / systemd) so the daemon picks them up on boot.
+
+// CLAUDE_BIN — detect at install time; omit if not found (server.mjs fallback)
+let CLAUDE_BIN_INJECT = null;
+if (process.env.CLAUDE_BIN) {
+  CLAUDE_BIN_INJECT = process.env.CLAUDE_BIN;
+} else {
+  try {
+    const detected = execSync("which claude 2>/dev/null", { encoding: "utf-8" }).trim();
+    if (detected && existsSync(detected)) {
+      CLAUDE_BIN_INJECT = detected;
+    }
+  } catch { /* which not available or claude not on PATH — omit */ }
+}
+
+// OCP_ADMIN_KEY — omit entirely when empty/unset; don't write empty string
+const OCP_ADMIN_KEY_INJECT = process.env.OCP_ADMIN_KEY || null;
+
+// PROXY_ANONYMOUS_KEY — same pattern
+const PROXY_ANON_KEY_INJECT = process.env.PROXY_ANONYMOUS_KEY || null;
+
 // ── Models: derived from models.json (single source of truth) ──────────
 const modelsConfig = JSON.parse(readFileSync(join(__dirname, "models.json"), "utf-8"));
 
@@ -286,6 +309,29 @@ banner.push(`╚═════════════════════
 console.log("\n" + banner.join("\n") + "\n");
 
 // ── Step 7: Install auto-start on boot ──────────────────────────────────
+
+// Log service-env injection plan (shown in both dry-run and live mode)
+console.log("\n🔧 Service unit env vars to inject:\n");
+if (CLAUDE_BIN_INJECT) {
+  log(`CLAUDE_BIN: ${CLAUDE_BIN_INJECT}`);
+} else {
+  log(`CLAUDE_BIN: (not found — server.mjs will auto-detect at runtime)`);
+}
+if (OCP_ADMIN_KEY_INJECT) {
+  log(`OCP_ADMIN_KEY: injected (length: ${OCP_ADMIN_KEY_INJECT.length})`);
+} else {
+  log(`OCP_ADMIN_KEY: (unset — admin endpoints disabled)`);
+}
+if (PROXY_ANON_KEY_INJECT) {
+  log(`PROXY_ANONYMOUS_KEY: injected (set)`);
+} else {
+  log(`PROXY_ANONYMOUS_KEY: (unset — anonymous access disabled)`);
+}
+
+if (DRY_RUN) {
+  console.log("\n  [dry-run] would write service unit with above env vars\n");
+}
+
 if (!DRY_RUN) {
   console.log("\n🔄 Installing auto-start on login...\n");
 
@@ -358,7 +404,13 @@ if (!DRY_RUN) {
     <key>CLAUDE_BIND</key>
     <string>${BIND_ADDRESS}</string>
     <key>CLAUDE_AUTH_MODE</key>
-    <string>${AUTH_MODE_CONFIG}</string>
+    <string>${AUTH_MODE_CONFIG}</string>${CLAUDE_BIN_INJECT ? `
+    <key>CLAUDE_BIN</key>
+    <string>${CLAUDE_BIN_INJECT}</string>` : ""}${OCP_ADMIN_KEY_INJECT ? `
+    <key>OCP_ADMIN_KEY</key>
+    <string>${OCP_ADMIN_KEY_INJECT}</string>` : ""}${PROXY_ANON_KEY_INJECT ? `
+    <key>PROXY_ANONYMOUS_KEY</key>
+    <string>${PROXY_ANON_KEY_INJECT}</string>` : ""}
   </dict>
   <key>RunAtLoad</key>
   <true/>
@@ -396,7 +448,7 @@ After=network.target
 ExecStart=${nodeBin} ${serverPath}
 Environment=CLAUDE_PROXY_PORT=${PORT}
 Environment=CLAUDE_BIND=${BIND_ADDRESS}
-Environment=CLAUDE_AUTH_MODE=${AUTH_MODE_CONFIG}
+Environment=CLAUDE_AUTH_MODE=${AUTH_MODE_CONFIG}${CLAUDE_BIN_INJECT ? `\nEnvironment=CLAUDE_BIN=${CLAUDE_BIN_INJECT}` : ""}${OCP_ADMIN_KEY_INJECT ? `\nEnvironment=OCP_ADMIN_KEY=${OCP_ADMIN_KEY_INJECT}` : ""}${PROXY_ANON_KEY_INJECT ? `\nEnvironment=PROXY_ANONYMOUS_KEY=${PROXY_ANON_KEY_INJECT}` : ""}
 Restart=always
 RestartSec=5
 StandardOutput=append:${logPath}